OK Ol Bob's on a roll...............
Despite the second hottest days we have had this year I plowed on with the caboose exterior.

Here is where we left off last week
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I got busy on the grab bars and the railing
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Got the trim installed on the back door.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

No welder this weekend so I did a bolt and screw job to get the railing installed.
The best result was the door swings full and misses the table / brake wheel by 3/4 of an inch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In the next two pics I need some help! Look at the 48" on center battens and I just stood the short one in to show 24" o/c. The question will 24" o/c be too much or is 48" too little?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There was a lot of sweat put out this weekend. Saturday morning started out heartbreaking as it was pouring rain at 8 am and the skys were black
I had things to do and didn't have time for this. Luckily about noon the skys cleared and I was able to get started.

There are a lot of little things that don't really show in the pictures. The bottom trim board and the battens. Taping all the corners with barrier tape to keep out water infiltration and Installing the corners. The trim on the front ( no pics

).
I was dog tired but am so proud of the look. Now I have got to get my roof guy to look at that wrinkled mess.