by Ned B » Thu Jan 07, 2016 10:15 am
GPW I'm leaning strongly towards the classic generic Benroy plan that Mike published. Slightly modified for foam.
(I keep saving as I go... Pardon the changes to this reply)
I'll likely go with 4x8 HF chassis, single 4x8 sheet of plywood (exterior grade) 2" foam walls and ceiling. Twin XL (college dorm size) mattress, minimal 12v power & foamstream style 120 plug if I put any 120 AC in it at all .
The doors will have Wiley Windows , shop built of course. I'll probably do a rectangular door , the rounded corner in the generic plans bugs me.
I know the sock effect locks everything together, but I'll put wood cross bars across the top and a 1x2 skeleton inboard of the foam; Just two hoops on either end of the doors. The galley will be just a simple plywood case for structural purposes, & a place to put the battery.
The insides will be covered in sheets, exterior will receive duck cloth, tb2 thinned and oops paint to seal, plus a top color coat of plasti-dip (simply because I can).