![Image](https://c1.staticflickr.com/9/8126/28949166144_a345ce70b2_z.jpg)
![Image](https://c4.staticflickr.com/9/8256/29494209011_5d5183903b_z.jpg)
Got the insulation roughed into place. (not the best photo)
![Image](https://c3.staticflickr.com/9/8816/29540611346_bd35ea62ac_z.jpg)
And just cause I couldn't contain my excitement and curiosity I put the masonite layer on and clamped it down. Its comin' together!
![Image](https://c2.staticflickr.com/9/8513/28951310233_cfc6946d1e_z.jpg)
Strung the 120v across and left room room in the insulation to make that happen.
![Image](https://c2.staticflickr.com/9/8352/28951304953_465d543e86_z.jpg)
Here's where I have things placed in the galley (so far). If it all makes sense then Ill start building it into the cabinets. Fortunately I left certain pieces of the galley unfixed.
And just for the hell of it, I turned the trailer around so I could get sunlight into the back while I work on it. So heres finally a clear shot of the left side profile.
![Image](https://c7.staticflickr.com/9/8061/28949150214_a4d98628b6_z.jpg)