I took my TD out for a test pull again yesterday. I had a pressure difference in the tires from side to side on the last test and fixed that problem, tire pressure for this test was 10lbs on each side.
I have a 2000 lb custom cut torsen axle from S.W. wheel. Is there a way to soften the ride on a torsen axle? My TD is light (prob under 500 lbs). There was quit a bit of hopping over RR tracks and the like. I was not driving I wanted to be able to watch the TD carefully and we went a little faster over those kinda things than if I had been driving.
Any input would be greatly appreciated.
Mc