I'm trying to figure out what size fuse to use for a certain circuit.
On the circuit will be:
2 porch lights - draw .15 amps each (total .3 amps)
2 reading lights-draw .2 amps each (total .4 amps)
2 interior puck lights-draw .18amps each (total .36 amps)
2 galley puck lights-draw.18 amps each (total .36 amps)
for a grand total on the circuit (if all were on at the same time) = 1.42 amps
The wiring to all the fixtures is 14 AWG.
I was going to use a 5 amp fuse. Does that seem a reasonable size fuse for this circuit
thank you for the help.
John