by Dan P » Wed Jan 05, 2022 12:05 am
I am knee deep in my build and have committed to using an inside/outside skin that is 5mm thick. I bought some 5mm RPLY and I'm getting close to skinning my TD soon. Seems like there is a lot of opinions on this stuff and need to know how this stuff has held up over the years and if there are any tricks on getting it to bend. My plan is to use PMF on the outside as well. I'm hoping to get some feedback from some folks that have had success using it, or failures would be helpful too if I need to cut my losses. I can take the sheets back to the store, but I'm still stuck trying to find a 5mm product. Perhaps there are some tricks to that I dont know about if I change my ceiling thickness. I currently have the walls up and the inside/outside wall is spaced 5mm for inside skin + 2x2 spar. This is my first build and my brain is running a mile a minute on this project. Any help would be much appreciated.
Thanks for your time
Dan