So I've lurked here for quite a while toying with the idea of building my own teardrop, and finally pulled the trigger on a pre-built one (tiny camper company 6x8 rugged rhino). I'm trying to add my own 12v system incorporating shore power and an inverter,and I was hoping some people with more experience might be able to spot any rookie mistakes and make sure I'm not going to burn down my brand new camper.
https://imgur.com/a/ueeOGnj
It's a 1000w renology inverter/charger, battery and inverter connected with 4 awg, kill switch, battery monitor, 300amp fuse and a 12v fuse box for a couple fans and lights that will be wired with 12 awg marine wire. Not planning on putting any really heavy loads on the system, just occasionally charging some laptops, a little projector and various small electronics, no microwaves or blenders or anything. Does this seem like a relatively safe set up? As in not going to ruin all this stuff I just spent a bunch of money on or burn me alive in my camper?
Thanks for any feedback you guys can give me!