Like Steve, I used Raka epoxy on my project. I don't know if there are significant differences in epoxies, but I don't think any of our projects exceed the capabilities of readily available epoxies. I found that for the same volume of product, Raka was less expensive. That said, the West System epoxy has a good reputation so you can't go wrong with it either.
I used the Interlux Brightside paint and was very happy with how it turned out. I used a thin foam roller then tipped the bubbles with a foam brush. The finish turned out great. Like everyone says, surface preparation is crucial to a good finish. If I would have spent more time in prep, the paint finish would have been near sprayed-on quality. I would have used the Pettit but the local West Marine didn't have the color I wanted so I used the Interlux instead. I don't think you can go wrong with either brand.
Joanne
Loader wrote:
I'll let you know. I'm gonna stop by a local West Marine, look at their system, as well as the Pettit Clear Sealant and Paint in the next day or two. Trying to be ready for the MadJack Roundup (aka The LCG).