OK here I go!! Build started....New Pic's.....

Anything to do with mechanical, construction etc
Post a reply

OK here I go!! Build started....New Pic's.....

Postby kirkman » Sat Jun 09, 2007 9:08 am

I bought a TS 4x8 trailer yesterday. I am going to build a 5x8 benroy on top of her. Yesterday I cut off the welded on fenders and moved the axle from on top of the springs to below the springs. It was not as hard of a job as I thought it would be. Looks like this will give me the clearance I need with out making big wheel wells. I wish I had a digital camera so I could keep you guys up dated. But alas you will have to use you imagination. That is unless my lovely wife gets me one for fathers day .
:) Wish me luck!!!!!!!
Last edited by kirkman on Mon Jul 23, 2007 3:52 pm, edited 1 time in total.
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Re: OK here I go!! Build started.

Postby steve wolverton » Sat Jun 09, 2007 10:22 am

kirkman wrote:That is unless my lovely wife gets me one for fathers day .


Build very slowly until Fathers Day, and then take a million photos! :pictures:

Good luck!
�veni, vidi, vici.�
User avatar
steve wolverton
1000 Club
1000 Club
 
Posts: 1676
Images: 11
Joined: Sun Nov 07, 2004 9:39 pm
Location: Brazoria, TX
Top

Postby Miriam C. » Sat Jun 09, 2007 12:07 pm

:lol: 8) The cheapy from Walmart works. Cost about $15. I know cause the majority of my pictures were taken with it. :thumbsup:

Image

Enjoy
“Forgiveness means giving up all hope for a better past.â€
User avatar
Miriam C.
our Aunti M
 
Posts: 19675
Images: 148
Joined: Wed Feb 15, 2006 3:14 pm
Location: Southwest MO
Top

Postby martha24 » Sat Jun 09, 2007 12:54 pm

Good Luck:thumbsup:
Have lots of fun too. :thumbsup:
Pictures are good for your own "record" too, not just to keep the mad one & others happy. :lol:
Martha ;)
Martha ;)

Image
User avatar
martha24
1000 Club
1000 Club
 
Posts: 1353
Images: 237
Joined: Thu Aug 03, 2006 4:32 am
Location: Calif., Goleta
Top

Postby kirkman » Sat Jun 09, 2007 7:59 pm

$15 dollar digital camera at walmart !!!!! I will have to check that out. :thumbsup:
I built the floor today and ended up with 2 1/2 inches of clearance between wheels and the floor. I hope that is enough. Tomorrow I am going to flip the floor over and give her a good coating of roofing tar.
:roll: I think that will take up the AM. :thinking: Then it is off to the hardware store for 3/8 bolts. Then to the auto parts store in search of bumper stops to keep my tear from bottoming out the springs and the tiers hitting the floor.
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Postby kirkman » Sun Jun 10, 2007 5:56 pm

Day three.....I undercoated the floor, installed the bumper stops, and bolted the floor to the trailer. Tomorrow I will cut out the walls and get them installed....I have to get a camera! 8)
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Postby mikeschn » Sun Jun 10, 2007 6:30 pm

You're working too fast, and not getting enough pictures...

Get over to Walmart ASAP for that $15 digital camera!!!

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby madjack » Sun Jun 10, 2007 10:54 pm

KM, for showing on the web, one of these didgital cameras will work as well as you need it tooooo........ 8)

(click pic)
Image
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby kirkman » Mon Jun 11, 2007 7:47 pm

Day 4......I went to walmart to day to get a cheep Digital camera and guess what they where out of them.

Madjack...I was going to order the one you found but by the time it gets here I will be dun with my build.

Today I got the walls cut out and installed. Ribs are in and I am ready to do the cabin ceiling. I have to work fast because I don't have a garage so every day it is nice I'm working hard. It looks like rain tomorrow so I might not finish as fast as I would like.
:D
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Postby kirkman » Tue Jun 12, 2007 6:21 pm

Day 5........Went to get 1/8 Baltic birch today and they where out so I went with paneling. I think it will look great. When I went to mix up some epoxy I realized I was out so I glued up the scarf joints with tight bond. So I have to wait until tomorrow to install the cabin roof. I spent the rest of the after noon trying to figure out how I want my galley to look.
I still have not come up with and good Ideas. :thinking:
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Postby mikeschn » Tue Jun 12, 2007 6:48 pm

That's what you get for not finding a camera! :R

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby NightCap » Tue Jun 12, 2007 7:26 pm

Hey this would work in a pinch.

Image

Weeeeeeeee The legendary Homemade Pinhole camera.
Image
#1 - 100% Done #2 - 100% Done Thinking about #3
User avatar
NightCap
1000 Club
1000 Club
 
Posts: 1131
Images: 259
Joined: Sun Jul 02, 2006 9:28 pm
Location: Iowa, Dayton
Top

Postby kirkman » Wed Jun 13, 2007 7:08 am

Nightcap....Now that's funny!! :lol: I'm gonna go right out and build me one.
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Postby Steve F » Wed Jun 13, 2007 7:11 am

kirkman wrote:Nightcap....Now that's funny!! :lol: I'm gonna go right out and build me one.


Dont forget to take some pics of the build ;)

Cheers
Steve
User avatar
Steve F
The 300 Club
 
Posts: 489
Images: 25
Joined: Fri Feb 02, 2007 8:12 am
Location: Sydney, Australia
Top

Postby kirkman » Wed Jun 13, 2007 6:44 pm

[/b] Day 6....I installed the cabin roof and then put a coat of polyurethane on the side where the foam insulation goes for extra. moisture protection. Then I started laying out my galley. I think this is going to be the hardest thing in the whole project because I don't know how I want it. I guess I should haul out all of my camping gear and see how it fits . :thinking:
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top
Next
Post a reply

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 4 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group