Drawing Programs... Need some advice FAST!!!

Things that don't fit anywhere else...

Drawing Programs... Need some advice FAST!!!

Postby Guest » Wed Apr 27, 2005 10:55 pm

I talked with Cafepress on the phone earlier this evening and they informed me that my images that I'm uploading are only 72dpi. They require at least 200dpi and recommend 300dpi as the way to go. (That explains why my images were so large when I built them to the required pixel sizes) :lol:
I'm using a program called Image Composer 1.5 that was a freebie when I purchased Microsoft FrontPage. I'm not seeing anything that will allow me to change the dpi settings, in fact I had to do a deep search on the Microsoft website to even find any info at all on this drawing program. It looks like it is pretty outdated.
The kids and I went to Staples and Costco this evening and none of the sales people knew what dpi's (dots per inch) were, so....I need some advice, because I need to straighten some stuff out in a hurry...
Anyone have any suggestions on which drawing program I should get?
Guest
 

Re: Drawing Programs... Need some advice FAST!!!

Postby Kevin A » Wed Apr 27, 2005 11:07 pm

Dean in Eureka, CA wrote:I talked with Cafepress on the phone earlier this evening and they informed me that my images that I'm uploading are only 72dpi. They require at least 200dpi and recommend 300dpi as the way to go. (That explains why my images were so large when I built them to the required pixel sizes) :lol:
I'm using a program called Image Composer 1.5 that was a freebie when I purchased Microsoft FrontPage. I'm not seeing anything that will allow me to change the dpi settings, in fact I had to do a deep search on the Microsoft website to even find any info at all on this drawing program. It looks like it is pretty outdated.
The kids and I went to Staples and Costco this evening and none of the sales people knew what dpi's (dots per inch) were, so....I need some advice, because I need to straighten some stuff out in a hurry...
Anyone have any suggestions on which drawing program I should get?


Dean, I just ran your dilemma by a friend, he suggested Corel Draw. I have no clue what the cost will be, but he says it's the best program available for what you're trying to do.
"Follow me, I'm right behind you"

ImageImage
User avatar
Kevin A
The other guy
 
Posts: 3222
Images: 289
Joined: Mon Jan 17, 2005 1:16 am
Location: California, Eureka

Postby Guest » Wed Apr 27, 2005 11:09 pm

Thanks Kevin,
I'll look into that, hopefully someone has that software in this town...
Guest
 
Top

Postby Nitetimes » Wed Apr 27, 2005 11:11 pm

There are a lot of them that will do what you need rather easily. One that I use all the time because it is pretty user friendly is Micrografx Windows Draw, Ulead's PhotoImpact is pretty good, Adobe Photoshop is a big favorite of some, tho a little pricey and JASC Paintshop Pro also comes to mind.
Just about all the decent, newer drawing programs let you choose your resolution.
Some are rather steep.. but there's always torrents....
Rich


Image
ImageImage
-
The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect themselves
against tyranny in government.
- Thomas Jefferson -
Personally, I carry a gun because I'm too young to die and too old to take a butt kickin'.
User avatar
Nitetimes
7000 Club
7000 Club
 
Posts: 7909
Images: 194
Joined: Sat Feb 12, 2005 12:44 am
Location: Butler,PA
Top

draw/photo program

Postby Will Smith » Wed Apr 27, 2005 11:27 pm

I use The Gimp: http://www.gimp.org/
It's freeware. Does as much as photoshop.
Benefit mankind, use your screen saver for something useful. More information here:
http://www.worldcommunitygrid.org/
Will Smith
Teardrop Master
 
Posts: 133
Joined: Sun Jun 13, 2004 5:24 pm
Location: Currently in San Saba, Texas
Top

Postby Guest » Wed Apr 27, 2005 11:58 pm

Thanks Guys...
I ordered an instant download of Corel Draw Suite 12, but "Gee Wally" it won't let me downlaod it until after 24 hrs. have past. :?
So I'm downloading Gimp right now to try and get my little problem fixed.
(Gee it's already at 22%)
I'm gonna really miss my funky little drawing program that I've been using, I know that thing inside out...
Guest
 
Top

Postby Nick Taylor » Thu Apr 28, 2005 12:54 am

Dean,

I replied in the bumper sticker thread but I'll repeat it here.

I use a program called Paint Shop Pro for all my graphics. You can download a full trial at http://www.jasc.com.

Save the graphics for Cafepress as PNG files for the best quality.

Nick.
User avatar
Nick Taylor
The 300 Club
 
Posts: 432
Joined: Tue Jun 08, 2004 8:18 pm
Location: San Diego, CA
Top

Postby Guest » Thu Apr 28, 2005 1:19 am

Thanks Nick, (Again)
Yes... I do go with png files.
I'm downloading PSP9 as we speak...
(Looks like as I sleep too... 1% downloaded; 10 hours 7 minutes left to go)
Thanks Everyone in both threads for your help...
Good Night For Now...
Guest
 
Top

Postby toypusher » Thu Apr 28, 2005 6:05 am

Dean,

I replied to you in another thread, but thought that I would pass this on to you hear also. From the Electrical Secrets section I had posted some graphics editing programs a while back. Anyway here is the link to that post:

http://www.tnttt.com/viewtopic.php?t=1941&postdays=0&postorder=asc&start=30

I like PhotoFiltre the best and the Gimp is also good! They are all free! :shock:

Kerry
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Re: draw/photo program

Postby Mike B » Thu Apr 28, 2005 2:41 pm

Will Smith wrote:I use The Gimp: http://www.gimp.org/


Graphical Image Manipulation Program. Originally developed to run on BSD Unix and Linux systems, it now even runs on a far inferior operating system.

:lol:


Mike
Hayden Lake, ID
Mike
Image
Hayden Lake, ID
User avatar
Mike B
500 Club
 
Posts: 549
Images: 2
Joined: Mon Apr 19, 2004 3:52 pm
Location: Hayden Lake, ID
Top

Re: draw/photo program

Postby mikeschn » Thu Apr 28, 2005 3:01 pm

Mike B wrote:
Graphical Image Manipulation Program. Originally developed to run on BSD Unix and Linux systems, it now even runs on a far inferior operating system.


Dos 3.3 with Windows 3.11? :lol:
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby DestinDave » Thu Apr 28, 2005 7:06 pm

Mike... can I get an upgrade to 3.11 from you? :lol:
Reality? What a concept!
Building "The Salty Tear" - a photo log of the project.
http://www.bluezenphoto.com/p979644357
User avatar
DestinDave
500 Club
 
Posts: 687
Images: 4
Joined: Sat Jan 29, 2005 10:03 am
Location: Hendersonville, NC
Top

Postby mikeschn » Thu Apr 28, 2005 7:10 pm

Gee, I dunno... those diskettes are buried in a layer of dust... Windows for Workgroups was the pits compared to Win95... which was the pits compared to Win98SE, which was the pits compared to WinXP.

I'll admit that Windows XP works good... a little bit too good, for all the hackers and the spyware program writers out there.

I guess I'll have to upgrade you to a Mac with 10.4 Tiger...

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby DestinDave » Thu Apr 28, 2005 7:14 pm

That could work.. when I cleaned out a storage building last year, I found an old KayPro with 5-1/4 floppies.. Turn it on to boot, go to lunch... :lol:
Reality? What a concept!
Building "The Salty Tear" - a photo log of the project.
http://www.bluezenphoto.com/p979644357
User avatar
DestinDave
500 Club
 
Posts: 687
Images: 4
Joined: Sat Jan 29, 2005 10:03 am
Location: Hendersonville, NC
Top

Postby mikeschn » Thu Apr 28, 2005 7:20 pm

Better than 8" floppies, eh? :lol:

http://www.pdp8.net/rx02/large/floppies.jpg

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top


Return to Off Topic

Who is online

Users browsing this forum: No registered users and 2 guests