Armorpoxy

Anything to do with mechanical, construction etc
Post a reply

Armorpoxy

Postby blood_sweat_guts_101 » Sun May 18, 2008 5:28 am

I have purchased some armorpoxy for my tear. My ? is for the seams and screw holes I was going to use rot doctors epoxy filler. Do I still need to coat with CPES or just use the filler and paint with my armorpoxy!



:? This is driving me insane!!

Thanks,
Scott
blood_sweat_guts_101
Teardrop Inspector
 
Posts: 5
Joined: Sat Dec 22, 2007 9:34 pm
Location: Pittsburgh, PA
Top

Postby mikeschn » Sun May 18, 2008 6:03 am

Using the CPES makes it easier for the epoxy filler to stick. I would still put some cpes on the joints and the holes.

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Arne » Sun May 18, 2008 6:43 am

I agree, the cpes will bond everything together.
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Thanks Mike

Postby blood_sweat_guts_101 » Sun May 18, 2008 8:34 pm

So I can just coat the seams and screw holes not the whole tear. Then use the filler. :worship:
blood_sweat_guts_101
Teardrop Inspector
 
Posts: 5
Joined: Sat Dec 22, 2007 9:34 pm
Location: Pittsburgh, PA
Top

Postby madjack » Sun May 18, 2008 10:35 pm

ArmorPoxy is designed to go over epoxy(fiberglass)...it is not meant to be applied directly to wood...personally, I would coat the entire trailer before painting...if not, then you need to use the primer that ArmorPoxy recommends for the paint...this is not the time to cheapout!!!!!!!!
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby mikeschn » Mon May 19, 2008 4:16 am

Good point MJ...

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Re: Armorpoxy

Postby Steve_Cox » Mon May 19, 2008 6:06 am

blood_sweat_guts_101 wrote:

:? This is driving me insane!!

Thanks,
Scott


Grasshoppa...........Take a deep breath. Relax, it is about the journey as well as the destination. 8)
Steve
User avatar
Steve_Cox
4000 Club
4000 Club
 
Posts: 4903
Images: 196
Joined: Sun Apr 03, 2005 8:46 am
Location: Albuquerque New Mexico
Top

Postby Toytaco2 » Mon May 19, 2008 10:02 am

This is the first I've heard about this product. Are we saying that CPES is the only primer/preparation that would be required for the Amorpoxy over bare wood?

I ask this because I was considering the Rot Doctor's Uniflex, but now, after looking at Armorpoxy's web site, I really like the variety of colors that are available.
User avatar
Toytaco2
500 Club
 
Posts: 540
Images: 368
Joined: Mon Dec 10, 2007 1:57 pm
Location: Oklahoma City, OK
Top

Postby madjack » Mon May 19, 2008 10:43 am

T2, according to their website, and from what research I've done, you can apply to the CPES coated wood without primer...according to their website, concrete and wood are the only things that need to be primed first...follow all manufacturers directions and keep in mind YMMV........
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby Miriam C. » Mon May 19, 2008 10:46 am

A. ArmorPoxy does not normally require the use of primers. For surfaces needing to be primed, we suggest using our floor sealer/prep for concrete or our primer for bare wood. Then apply Armor Poxy full strength for the second coat! ( make sure to check all federal, state and local regulations regarding V.O.C. - Volatile Organic Compounds - issues to assure compliance, before thinning.)


I found this on the website under Marine. Personal opinion only, but with the wind and rain we get this seems to best fit a TD application.
“Forgiveness means giving up all hope for a better past.â€
User avatar
Miriam C.
our Aunti M
 
Posts: 19675
Images: 148
Joined: Wed Feb 15, 2006 3:14 pm
Location: Southwest MO
Top
Post a reply

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: IndigoIrish and 10 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group