Propane regulator question

Anything to do with mechanical, construction etc

Propane regulator question

Postby del » Tue Jun 24, 2008 8:33 pm

Image
Back ground I have a heater and stove that is designed for throw away 1pd propane tanks.

When I installed my propane tank I found that if I put a regulator on the tank the heater would not function, so I removed it (I believe it has a built in regulator). Now I am trying to find a hose to connect up my colmen cook stove (also originally designed for a 1pd bottle, with a regulator of its own) and am told I need a regulator on the tank, because the propane will turn to liquid in the line. Suggestions?

del
User avatar
del
5000 Club
5000 Club
 
Posts: 5674
Images: 410
Joined: Fri Sep 08, 2006 3:27 pm
Location: washington, yakima but tell Mary K Fairbanks

Postby Dale M. » Tue Jun 24, 2008 8:56 pm

They are all over the place.....

Try here to identify what hose fits your particular application..

http://www.mrheater.com/products.asp?catid=58

You could also inquire if they would send you a file called ...

MH Propane Access Installation Guide-1.pdf

It has all sorts of connection options for all sorts of tanks and hoses and lamps and stoves... I wish they has it up on site, but they don't....


Dale
Last edited by Dale M. on Tue Jun 24, 2008 9:16 pm, edited 1 time in total.
Lives his life vicariously through his own self.

Any statement made by me are strictly my own opinion.
You are free to ignore anything I say if you do not agree.

Image
User avatar
Dale M.
2000 Club
2000 Club
 
Posts: 2693
Images: 18
Joined: Thu Jun 09, 2005 8:50 pm
Location: Just a tiny bit west of Yosemite National Park

Postby mechmagcn » Tue Jun 24, 2008 9:14 pm

Both your stove and heater should run on high pressure gas. The problem in running a long run of high pressure propane is the condensation of an oily residue in the lines. On some RVs, with the propane cylinders mounted on each side, there was a problem with this condensation in the high pressure crossover line. The common "fix" is to install a 10 PSI regulator on the cylinder. This will alleviate the high pressure in the line but will not affect how your appliances function.
Jeff & Micki
53 F100
Mercedes turbo diesel
Teardrop "finished" as if they ever are
You can never be lost if you don't care where you are going!
User avatar
mechmagcn
Donating Member
 
Posts: 813
Images: 56
Joined: Mon May 05, 2008 9:47 pm
Location: Moro Bay, AR
Top

Postby del » Tue Jun 24, 2008 9:38 pm

mechmagcn wrote:Both your stove and heater should run on high pressure gas. The problem in running a long run of high pressure propane is the condensation of an oily residue in the lines. On some RVs, with the propane cylinders mounted on each side, there was a problem with this condensation in the high pressure crossover line. The common "fix" is to install a 10 PSI regulator on the cylinder. This will alleviate the high pressure in the line but will not affect how your appliances function.
Any idea where to get said 10 psi regulator?

del
User avatar
del
5000 Club
5000 Club
 
Posts: 5674
Images: 410
Joined: Fri Sep 08, 2006 3:27 pm
Location: washington, yakima but tell Mary K Fairbanks
Top

Postby madjack » Tue Jun 24, 2008 10:43 pm

Del, any propane or propane accessory outlet should have them...they will be red as opposed to blue(which is low pressure)...I just use an outlet tree(available from Coleman or Century at most sporting goods outlets), that attaches to the 20# tank...I set a lantern on top and run rubber hoses to the stove...the control valve on (1#feed) stoves and lanterns have a built in regulator.....
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: Bing [Bot] and 6 guests