Propane Tank Placement?

Anything to do with mechanical, construction etc

Propane Tank Placement?

Postby wlivesey » Sun Sep 06, 2009 1:51 pm

I'm almost afraid to ask but here it goes... Is it okay to put my propane tank under the galley rather than on the tongue? I only need propane for a stove and nothing else. Keep in mind, I'm building a standy, so the galley is inside.
User avatar
wlivesey
The 300 Club
 
Posts: 469
Images: 283
Joined: Sun Aug 12, 2007 1:22 pm
Location: DFW, Texas

Postby teardrop_focus » Sun Sep 06, 2009 2:17 pm

Is it okay to put my propane tank under the galley rather than on the tongue?


Only if the area immediately surrounding the tank is completely sealed from the trailer's interior... and extremely well-vented to ambient air. The possible configurations of such a placement are numerous.

:pipe:

:SG
.
Image

"There is something about these little trailers that brings out the best in people." - BigAl, Scotland, 2010

"Climb the mountains and get their good tidings. Nature's peace will flow into you as sunshine flows into the trees...
The winds will blow their own freshness into you and the storms their energy, while cares will drop away like autumn leaves..." - John Muir, 1898


Chris Squier / teardrop_focus :-)~
User avatar
teardrop_focus
Donating Member
 
Posts: 5975
Images: 127
Joined: Sat Apr 11, 2009 3:18 pm
Location: SoCal

Postby wlivesey » Sun Sep 06, 2009 4:49 pm

That's what I thought. Thanks for the confirmation.

Bill
User avatar
wlivesey
The 300 Club
 
Posts: 469
Images: 283
Joined: Sun Aug 12, 2007 1:22 pm
Location: DFW, Texas
Top

Postby Shadow Catcher » Sun Sep 06, 2009 6:10 pm

You should also have a gas and CO detector.
There was a fire in a facility that loaded propane cylinders as part of the exchange your empty one for mostly full one in the Toledo area. The video was rather entertaining, some taking off like rockets and one on the ground spinning like pinwheel. Gas in a confided space, bad thing. One other thing to consider is that the valve is designed to come off in a fire or impact so A. I want it out side pointed up and B. I do not want it in the rear where it is more vulnerable to a crash.
User avatar
Shadow Catcher
Donating Member
 
Posts: 6008
Images: 234
Joined: Sat Apr 11, 2009 8:26 pm
Location: Metamora, OH
Top

Postby Dale M. » Sun Sep 06, 2009 10:16 pm

Keep in mind propane is a heavier than "air" gas so it settles or pools in low places.... "Drain" vents (no not dish water) need to be at very bottom of enclosure...

My personal preference is "outside" though....

Dale
Last edited by Dale M. on Mon Sep 07, 2009 7:59 pm, edited 1 time in total.
Lives his life vicariously through his own self.

Any statement made by me are strictly my own opinion.
You are free to ignore anything I say if you do not agree.

Image
User avatar
Dale M.
2000 Club
2000 Club
 
Posts: 2693
Images: 18
Joined: Thu Jun 09, 2005 8:50 pm
Location: Just a tiny bit west of Yosemite National Park
Top

umm...

Postby laoutdoorsman » Sun Sep 06, 2009 11:40 pm

propane----outside, definately....absolutely....and right side up(valve on top)...just do it...
mike breaux...its pronounced "bro".....
i think i should have taken notes along the way, because ive forgotten waaaay more than i remember...
User avatar
laoutdoorsman
Teardrop Master
 
Posts: 263
Images: 44
Joined: Thu Sep 03, 2009 6:25 pm
Location: amite, la
Top

Re: umm...

Postby kennyrayandersen » Mon Sep 07, 2009 7:05 pm

laoutdoorsman wrote:propane----outside, definately....absolutely....and right side up(valve on top)...just do it...


I agree – don’t fight the feeling! Plus, if you get a 10 pounder, they are kind of cute.
User avatar
kennyrayandersen
1000 Club
1000 Club
 
Posts: 1750
Images: 38
Joined: Sun Apr 29, 2007 10:27 pm
Location: TX
Top

Postby TPMcGinty » Tue Sep 08, 2009 6:56 am

I use the cheap one pound gas cylinders that you can get in any store and I keep them in the tear. I use them on a basic coleman camp stove and it works fine. I didn't want to have to run gas pipe through my tear or worry about ventilation.
Tim

Image
User avatar
TPMcGinty
Gold Donating Member
 
Posts: 1558
Images: 146
Joined: Sat Nov 10, 2007 7:16 pm
Location: Saint Michael, MN
Top

Postby Dale M. » Tue Sep 08, 2009 9:43 am

TPMcGinty wrote:I use the cheap one pound gas cylinders that you can get in any store and I keep them in the tear. I use them on a basic coleman camp stove and it works fine. I didn't want to have to run gas pipe through my tear or worry about ventilation.


You do not run it through your tear, you run it under the dear....

Dale
Lives his life vicariously through his own self.

Any statement made by me are strictly my own opinion.
You are free to ignore anything I say if you do not agree.

Image
User avatar
Dale M.
2000 Club
2000 Club
 
Posts: 2693
Images: 18
Joined: Thu Jun 09, 2005 8:50 pm
Location: Just a tiny bit west of Yosemite National Park
Top

Postby TPMcGinty » Wed Sep 09, 2009 6:55 am

Dale M. wrote:
TPMcGinty wrote:I use the cheap one pound gas cylinders that you can get in any store and I keep them in the tear. I use them on a basic coleman camp stove and it works fine. I didn't want to have to run gas pipe through my tear or worry about ventilation.


You do not run it through your tear, you run it under the dear....

Dale


Thanks for the correction. You still have to run it and I don't. My point is I didn't want to mess with it.
Tim

Image
User avatar
TPMcGinty
Gold Donating Member
 
Posts: 1558
Images: 146
Joined: Sat Nov 10, 2007 7:16 pm
Location: Saint Michael, MN
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 6 guests