madjack
![Cool 8)](./images/smilies/econ_kewl.gif)
madjack wrote:Ira that is a parts washer as used in mecjanics shop...it has no inlet and no drain...you pour a couple gallons or so of varsol or some other solvent into it and the pump recirculates thru the spout and back into the container...the pump is built into the container, probably has some sort of filter/screen arangement along with the pump in the bottom of the container...while it would work, it would also take a fair bit of modding to work
madjack
Dean in Eureka, CA wrote:Ira,
I've got a boat sink that measures 10 x 14 with a whoping 10" depth.
It has an 1 1/2" flange. (Making it 13 x 17 overal)
It's designed to be a drop in, but it could easily be made to install from underneath the counter. (That woud be 11 1/2" of above countertop space you'd need to at least hide the front flange)
This is a very common boat sink.
Users browsing this forum: No registered users and 8 guests