Teardrops n Tiny Travel Trailers

by **GPW** » Wed Jan 25, 2012 7:49 pm

That's just an Incredibly Wonderful routing job !!!!! :applause:

Just a thought to test your router skills , now you can route an inner trim ring to fit and finish the "look" ... :thinking:

Probably don't have to cover it even , just paint it ... or use that new HW FF material ... that's looking better and better for just such situations ...??? :thinking:

by **pete42** » Wed Jan 25, 2012 10:54 pm

thatsa alooking gud............

you knew all along how to do it didn't you?
you just wanted to see what we would come up with.

pete

by **atahoekid** » Thu Jan 26, 2012 1:25 am

OOOOOOWWWWWW, AAAAAAAAWWWWWW. That looks great! As always, you've done an impressive job

by **eaglesdare** » Thu Jan 26, 2012 6:04 am

by **pete42** » Thu Jan 26, 2012 8:20 am

Miss Louella
there is still something about your dog sitting in a princess bed that brings a smile to my face
I showed it to my friend and now she wants another dog her 15 year old shelty died last year.

I really like watching all the builds here on this site.

Pete

by **eaglesdare** » Thu Jan 26, 2012 9:16 am

pete42 wrote:Miss Louella
there is still something about your dog sitting in a princess bed that brings a smile to my face
I showed it to my friend and now she wants another dog her 15 year old shelty died last year.

I really like watching all the builds here on this site.

Pete

not to hi-jack mikes thread, but that is so sweet. thank you. and you just put a smile on my face.

tell your friend to go get another one. they bring so much joy to ones life.

by **pete42** » Fri Jan 27, 2012 9:47 am

oops my bad I forgot which post I was in I'll blame it on old age.

pete

by **ebutler** » Sun Jan 29, 2012 11:30 am

I know that you have already solved the circle cutting problem. This is another solution that others can use. A rotozip with the circle cutting attachment should do the job. I just got back on the board after a long absence and found this thread. This is a very good thread and I really am interested in your build, lots of good craftsmanship and innovative ideas. I can hardly wait for the finish and a road test. Been lurking here up to now.
:thumbsup:

by **Juneaudave** » Sun Jan 29, 2012 11:42 am

Router Master!!!

by **GPW** » Tue Jan 31, 2012 9:06 am

Iâ€™d guess weâ€™re all kindaâ€™ anxious to see the outcome of that door/window ... This may deserve a sticky of itâ€™s own ... easy Foamie windows ... :thinking:

by **mikeschn** » Tue Jan 31, 2012 5:46 pm

Well, if I am not upgrading the forum, then maybe on the weekend.

Mike...

by **mikeschn** » Sun Mar 04, 2012 2:16 pm

Well since we started taking apart the giant teardrop today, I wanted to pull out the foamie and see what was left to do.

It was cold outside, so I grabbed a tiny electric heater and threw it inside the foamie. Within a few minutes it was warm in there. :thumbsup:

But I'm not allowed to work on the foamie until Chell finishes putting on the second coat of paint on the inside.

Mike...

by **GPW** » Sun Mar 04, 2012 9:40 pm

Mike it was disheartening to see your TD damages ... That was just AWFUL !!!

But you know , we’re all most anxious to see the progress on your Foamie , which might turn out as being more cost effective and less trouble in the long run ... :thinking:

Do you have any cost comparisons for your Big TD vs the Foamie .. ??

by **eaglesdare** » Mon Mar 05, 2012 7:53 am

let chell know we are counting on her to get out there and put that second coat on! that foamie is important to all of us. :wine:

by **Cliffmeister2000** » Mon Mar 05, 2012 9:00 am

GPW wrote:Mike it was disheartening to see your TD damages ... That was just AWFUL !!!

What happened, Mike?

Teardrops n Tiny Travel Trailers

10' Standie Foamie ... on hold

Re: 10' Standie Foamie ... porthole window cut

Re: 10' Standie Foamie ... porthole window cut

Re: 10' Standie Foamie ... porthole window cut

Re: 10' Standie Foamie ... porthole window cut

Who is online