Hi All,
If I build a chassis with only a 42 or 48 A-frame tongue and the 50 degree coupler and I want to put a front box on the tongue, will some brackets bolted to the front of the frame and the two angle pieces of the tongue be enough to support a box or should I have the type of tongue like the one Bledsoe3 built on his very cool trailer where there is a middle straight section (that runs back under the trailer) to the tongue as well? or would I need to weld a plate to the tongue where the box would sit, or could I just bold a wooden plate or grate to the tongue?
Thanks!
Kris