My spouse finished up the headliner this weekend with 1/2” foam and fabric. This allowed me to wire in the pot lights, maxxfan, exterior light, get the interior panels in, and driver side windows installed.
Biggest challenge was making a door, fitting the handle, and installing the AP window with a built in shade.
You must keep in mind that these products are meant for THICKER doors (1-1/2”). I sandwiched the scrap ACM door cut out, 3/8” ply, and then 3/4” ply, and the scrap interior panel door cut out to achieve this. With everything glued, routered, installed, I hung the door and frame permanently.
- 3CE67F22-5258-4006-82C1-B4703B5E6737.jpeg (71.21 KiB) Viewed 407 times
- BB285DB4-708B-41D7-9F28-BFE7C4147123.jpeg (69.04 KiB) Viewed 407 times
- 3B6371F3-A566-4ECA-9CC2-7A7194CAF283.jpeg (69.58 KiB) Viewed 405 times