Hey all, finnally got our build underway, but am having second thoughts about axle to frame clearance and tire to fender clearance. We went with a 3500lb axle, and lighter springs, 2000lb, axle mounted over the springs. That configuration leave about 5 in of clearance between the frame and axle? Doe anyone have any concerns that it should be more? How about the tire to fender clearance, it is set up for 3 in on each side and 4" from top of tire to fender? Any thought on that ammount of clearance? Our driving habits are deffinately off road, our tow rig is a jeep wrangler, but I am not out to tear anything up or go rock crawling, so I drive pretty slow and mild off roading I guess, which is kinda what we were building for. Pics below. Comments, ideas and experience is most welcome!
http://tnttt.com/album_ ... c_id=64582[img]
http://tnttt.com/album_ ... c_id=64583[/img]
http://tnttt.com/album_ ... c_id=64584[img]
http://tnttt.com/album_ ... c_id=64584[/img]
Thanks,
Ron