GPW, if the bolts are galvanized they will never come off. The zinc galls up in the threads and makes it nearly impossible to turn. If you are lucky a good sized wrench will break the bolt. If not cut the buggers off.
Randy
Moderator: eaglesdare
eaglesdare wrote:yeah i was thinking that they are weak normally. but i can cut out sections of my foam from the inside out and put a good magnet inside that.
since i don't have any "hard" points in mine. the only thing i have would be my spars.
i like the idea that i could put something up and take it down.
just some ideas i am thinking about while waiting for the weather to get nicer and the money tree to grow more green stuff.
Ratkity wrote:[SNIP]
Wait! That's a GREAT idea! There are magnets (not the cheapo sheet ones) that are very strong that you can use.[SNIP]
Hugs,
Ratkity
Users browsing this forum: No registered users and 3 guests