DC Wiring (sensible wiring doc)

Anything to do with mechanical, construction etc

DC Wiring (sensible wiring doc)

Postby 55chevy » Sat Apr 27, 2013 10:32 am

I didn't like the one size fits all (10 gauge) theory for DC wiring so I started doing some research on DC wiring this morning. I ran across what I think is a valuable document so I thought I would share. It was written by Hella for automotive use and it's just what I was looking for to use as a guide for the DC wiring of my trailer. http://www.rallylights.com/hella/SensibleWiring.aspx

The rallylights.com website also sells all types DC electrical products under the electrical tab :o . Something in particular I was looking for was jacketed strand wire in various gauges and conductors.

Good luck with your projects.
Steve
Coffee drinkers are better thinkers...I just haven't had enough.
User avatar
55chevy
Teardrop Inspector
 
Posts: 20
Joined: Mon Dec 31, 2012 8:24 pm

Re: DC Wiring (sensible wiring doc)

Postby 55chevy » Sun Apr 28, 2013 9:51 am

Please note if you use the chart to size your wire, don't overlook the important notes below the chart:

1. Calculate the current load and find the next highest on the top row. Go down that column until you find the length you need to run. The wire gauge required is shown in the far left column.
2. The maximum lengths are based on a ½ volt drop over the indicated length.
3. To be safe, always choose one wire size larger than you need for the required current carrying capacity and length.
Coffee drinkers are better thinkers...I just haven't had enough.
User avatar
55chevy
Teardrop Inspector
 
Posts: 20
Joined: Mon Dec 31, 2012 8:24 pm

Re: DC Wiring (sensible wiring doc)

Postby Shadow Catcher » Sun Apr 28, 2013 3:26 pm

All of the wiring in Compass Rose is 14 ga or larger with the exception of communications lines from solar controller, DC shunt to battery monitor.
User avatar
Shadow Catcher
Donating Member
 
Posts: 6008
Images: 234
Joined: Sat Apr 11, 2009 8:26 pm
Location: Metamora, OH
Top

Re: DC Wiring (sensible wiring doc)

Postby RandyG » Sun Apr 28, 2013 4:04 pm

Thanks Chevy! I was just going to wire everything with 12 ga but the chart will help me save some money.
Randy
Aircraft fabricator, novice carpenter, electrical apprentice, audio engineer dropout.
Build thread - http://www.tnttt.com/viewtopic.php?f=50&t=54126
User avatar
RandyG
500 Club
 
Posts: 695
Images: 115
Joined: Thu May 10, 2012 6:52 pm
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: Google [Bot] and 2 guests