by 55chevy » Sun Apr 28, 2013 9:51 am
Please note if you use the chart to size your wire, don't overlook the important notes below the chart:
1. Calculate the current load and find the next highest on the top row. Go down that column until you find the length you need to run. The wire gauge required is shown in the far left column.
2. The maximum lengths are based on a ½ volt drop over the indicated length.
3. To be safe, always choose one wire size larger than you need for the required current carrying capacity and length.
Coffee drinkers are better thinkers...I just haven't had enough.