detailed pics of a hatch needed.

[Wig]

could a few people help me out with a some pics or drawing of a galley hatch install.thanks

[planovet]

What kind of hatch are you building? Mine is along the lines of Steve Frederick's plans. The hatch seal on his plans is much different that most use.

Here is the link to my hatch build page on my website. If you have any questions or need any other pictures just let me know.

Hatch Build

[synaps3]

My design does not have a galley, but if it did, I would go with Steve's plans. They seem completely waterproof and foolproof.

Good pics on his website: http://www.campingclassics.com/diner7.html

[len19070]

Here are some photos of not necessarily the hatch but how I mount it.

Hope it helps.



















Hopes this helps.

One very common sense piece of advise I give when asked

"What can I do about Spring Back"?

Use materials that Don't Spring Back.

I use a piece of FRP, good side in for the base and the aluminum over that. Edged with

http://cgi.ebay.com/ebaymotors/Boat-Yac ... iesQ5fGear

All materials have a very low "Spring Back" rate.

Happy Trails

Len

[Wig]

thanks.that what I needed.Mark I remembered I liked your but for got about your build page.I see exactly the way I want one it now.