I think I might be on to something...roof covering idea

[eddie6775]

Hi everyone, I've been carefully planning my impending build of and I've learned that other than the 3/4 plywood for the floor, finishing the roof to be weather tight is going to be the single most costly thing. So any way, the other day I was helping my boss unload this big canopy and thought; maybe I can use this material for my roof coating! Big white tarps are easy to get on a budget. maybe...just maybe i can glue it down to primed wood with liquid nails smeared evenly and then trim the edges flush before installing molding. I'm trying to avoid seems. Does this sound possible?

[Catherine+twins]

This is discussed in the Foamy area down below Build Journals. We are using it as a strengthening skin over the foam construction, but it is also supposed to be water proof.

Catherine

[eddie6775]

Thanks Catherine! I'll be down below reading then..lol.

[rowerwet]

http://tnttt.com/viewto ... highlight=
I used painted canvas about the same idea, was just wondering about tyvek instead of canvas...

[Synthesis]

You can always look into EPDM (Rubber roofing).. Check any RV Repair Center, or any mobile home repair, and roofing contractors.

I paid around 40 dollars for enough rubber roofing to do two 5x10 campers.
The adhesive was another 30 bucks.