My Modified/Homemade Roof-Wall Mldg.

[AlgoDan]

So got my #8x1in. Stainless screws/roof sealant, just need to drill pilot holes through the moulding and the roof. Then try to get that portion of the build done.....

[AlgoDan]

Sure will, and post a pic or two...

Let us know how it goes as I'm going to be doing the same very soon

[AlgoDan]

It will be the last thing I install, I have pre-drilled the holes it he moulding and have the stainless screws..Will post pics, should be likely by next week...

So how did the installation of the moulding go Can you post pics

[AlgoDan]

Ok started on the edge trim today. More to follow.

[AlgoDan]

Here is the trailer almost all trimmed up

[Oldragbaggers]

Dan, your trailer looks great. And kudos to you for thinking outside the box and coming up with a great solution!!

[AlgoDan]

Thanks Becky. I guess that's why we as builders our minds are always going from sun up to sun down...going and going.Cheers

Dan, your trailer looks great. And kudos to you for thinking outside the box and coming up with a great solution!!