Teardrops n Tiny Travel Trailersor t n ttt for short (tnttt.com) |
Well I started today
62 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
by sunny16 » Mon Apr 17, 2006 10:25 am
You are really moving on the trailer, Spade. Are you pinting the sides and covering the top? And where are you getting the aluminum from? There is a place in SLC that does trilers and has roof top aluminum in wide size that I was thinking of using. Keep up the great build!
I cut it three times and it's still too short!!
Perfection is all I ask.......
Perfection is all I ask.......
-
sunny16 - The 300 Club
- Posts: 412
- Images: 70
- Joined: Fri Oct 14, 2005 10:04 am
- Location: Utah, a pretty great state! (West Jordan)
by Spadinator » Mon Apr 17, 2006 5:23 pm
The sides are painted with an exterior grade latex paint. The roof and hatch are skinned with 4 mil Coroplast that I got from Regional Supply in SLC. It was really easy to skin the top. I need to trim and seal the doors, do latches, and exterior ligthing and cabinets and it will be done.
Never do anything you don't want to explain to the paramedics.
-
Spadinator - 500 Club
- Posts: 500
- Images: 47
- Joined: Thu Oct 06, 2005 11:35 am
- Location: Westpoint Utah