wiring the hatch

[fob]

im going to run my wires in the roof due to me only having a single skin

how do you run wire to your tailgate lights in the hatch ???

[rowerwet]

mine makes the jump from the tear to the hatch at the top of the galley wall, while this is the way to do it, I see why the originals had the tail lights on the fenders or sides of the galley.

[Woodbutcher]

I used 2 4 wire plugs. This way if I ever needed to remove the hatch, it was a simple unplug. Plus all the wires were color coded to make hooking up easy.

[aggie79]

I used 2 4 wire plugs. This way if I ever needed to remove the hatch, it was a simple unplug. Plus all the wires were color coded to make hooking up easy.

I did the same.

[absolutsnwbrdr]

I did the same - added a plug near the hatch hinge, but I used m/f Molex connectors (4-pin computer component power supply plug)

[Esteban]

Del City delcity.net has a selection of Trailer Connectors you can choose from.

I'm using a 5-Way connector so I can turn the galley hatch light on or off with a light switch. 5-Way Connectors

[fob]

I used 2 4 wire plugs. This way if I ever needed to remove the hatch, it was a simple unplug. Plus all the wires were color coded to make hooking up easy.

I like this idea thank you

[fob]

Del City delcity.net has a selection of Trailer Connectors you can choose from.

I'm using a 5-Way connector so I can turn the galley hatch light on or off with a light switch. 5-Way Connectors

thanks for the heads up but I don't think they deliver to derby {England}