Installing the Front wall and ceiling.
![Image](https://www.tnttt.com/gallery/image.php?mode=medium&album_id=3448&image_id=125308)
Cutting the hole for the fan.
![Image](https://www.tnttt.com/gallery/image.php?mode=medium&album_id=3448&image_id=125310)
Small nails from the nail gun weren't cutting it, went with screws, then wood filler for the screw heads.
![Image](https://www.tnttt.com/gallery/image.php?mode=medium&album_id=3448&image_id=125309)
![Image](https://www.tnttt.com/gallery/image.php?mode=medium&album_id=3448&image_id=125311)
Applied "Magic Mix" to both faces of the Luan for the ceiling, then 2 coats of Zinsser oil-based Primer to the inside surface.
![Image](https://www.tnttt.com/gallery/image.php?mode=medium&album_id=3448&image_id=125312)
All Primed, ready to paint.
![Image](https://www.tnttt.com/gallery/image.php?mode=medium&album_id=3448&image_id=125313)
![Image](https://www.tnttt.com/gallery/image.php?mode=medium&album_id=3448&image_id=125314)
CRAP!!! Slipped up with the electric planer while trying to trim the spars level with the profile.
![Image](https://scontent.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10364209_10203353975186087_3401444112128649998_n.jpg?oh=5196b3e7aed5a0172c3ebc5339cac8a0&oe=559D77C1)
It's not so bad, nothing I can fill in then cover with fiberglass.
![Image](https://scontent.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/10259846_10203353975306090_2592440876906933977_n.jpg?oh=5e23874d10f143de1cefd6543ea65863&oe=559C4582)