Wanted to post an update on our progress. Haven't had a lot of extra time lately to get a build thread started, but I'll add a couple of pics here. I have LOTS of pictures and will someday get them all organized and posted in a thread. But for now.....We have gotten the insulation all done except for the side door, I want to take the door apart and strengthen it some. Windows have been installed, rooftop AC installed, and ceiling is in. Electric is in progress. I have 120v panels installed (main and a subpanel for inverter circuits) and the 12v converter installed. So far, 2-120v outlets and 2-12v lights and the AC are the only things working. Murphy bed is made, but I don't want to install it yet until I get the epoxy flooring put down. We have repositioned all the rings in the floor where we need them for strapping down the motorcycle. We have collected just about everything we need to finish (toilet, tub, water tanks, sinks, etc.) Its a rather large pile of stuff in the shop, but slowly diminishing.
Inside of trailer as we bought it:
Insulation going in with my awesome helper:
Rooftop AC installed:
windows in and murphy bed set in place: (We almost went camping this last weekend as it is in this pic, but had to prepare for our new house instead)