LesterS wrote:Just to demonstrate that "Ten Foot Rule" will really need to apply. Even one of the best looking seams still looks like this:
The flat seams really are the worst offenders.
LesterS wrote:Another weekend - another bit of work complete.
The fold-down table issue; solved. Purchased a plastic folding table from Lowes (24" X 48") - It fit perfectly!
I just had to place the ledger pieces a bit lower, because the table was 1-3/4" thick. It's good I hadn't started that part yet.
Sorry no picts, not very interesting to see.
I also finished wiring up a power source; a small battery from "Batteries+plus". It is an 18ah 12v Sealed Lead Acid type. Designed for use in emergency lighting systems. I figured that a battery in the Nest'r was definitely going to be used in fits and starts - just like emergency lighting. We'll see if it was a good choice and if 18 amp hours is enough to run the Fantastic Vent for three nights.
Here she is all lit up -- it will power the fan; 4 interior lights, one exterior light, AND the 10 running lights without a problem (for a short while anyway.)
I also had a friend at work CNC cut a plastic logo; so she'll be all official and stuff.![]()
Getting very close to taking her for a test camp!
Users browsing this forum: No registered users and 10 guests