Door trim

[SmokeyBob]

Finally got around to installing the aluminum door trim. Maybe next week, weather permitting, I'll get the doors up.

[madjack]

...hey Bob, ya might wanna consider attaching the trim with more than just some blue painters tape ......

[SmokeyBob]

Jack
Your wright about that tape. But they said you could leave it on for several days. Recon I'll have to put some screws in.

Now if I can just remember where I put em.

[rooster]

Speaking of door trim, friday I took the big step and started putting on the trim around my doors. I don't know what I was afraid off before, the trim I got from Grant Whipp was nice and soft to work with.
On my first door I bent the 1" piece right around the inside radius with no problem. With the "T" molding, I held it in place with one hand and gently and slowly bent it around the radius of the door and it too was soft and followed the curve right nicely, there was only one small place that push out.

Jim,

[SmokeyBob]

Jim
I was looking at your album. Your TD is looking good