Who has used Filon?

[bdosborn]

I vacuum bagged mine but I still rolled it out first.

Bruce

[Atomic77]

I think I'm going to use West epoxy on the walls then vacuum bond them. Any ideas on the ceiling?

[bdosborn]

I floated the filon on the roof, no cement....

Bruce

[Atomic77]

I floated the filon on the roof, no cement....

Bruce

How does that work exactly?

[bdosborn]

You just lay the skin on the trailer roof and use the edge trim to hold it down. No glue required. Most people do it that way without a hitch.

Bruce

[Atomic77]

You just lay the skin on the trailer roof and use the edge trim to hold it down. No glue required. Most people do it that way without a hitch.

Bruce

Is this method the standard? Does that still work when the front wall is also part of the roof?

[bdosborn]

Pretty standard, I don't know anyone who hasn't floated their roof skin. My front wall is part of the roof and I wrapped the filon down to the frame:



Bruce

[Toyotamike]

Mine has oil canned on one side pretty bad over this summer. Anyone manage to salvage the filon when they fixed this issue? I want to fix before I bed liner the whole thing.

[Atomic77]

Mine has oil canned on one side pretty bad over this summer. Anyone manage to salvage the filon when they fixed this issue? I want to fix before I bed liner the whole thing.

How did you bond your Filon to your walls? Were your walls coated with anything prior to the installation? How did you do your roof?

[Atomic77]

Mine has oil canned on one side pretty bad over this summer. Anyone manage to salvage the filon when they fixed this issue? I want to fix before I bed liner the whole thing.

Mike... Did you ever fix this issue?