Kermit

[Sheddie]

Yeah. I bet it is way easier to load and post pictures with one hand (... beer in the other ) than it is to do the actual work one handed (...beer in the other ), so logic dictates that posting photos is the same as drinking beer.

No pictures, no beer!

It's either that or get Sandi to do the welding while you have a beer oops I meant to say, post the photos

[Vedette]

Took some pictures of my new "rounded" trunk corners....before we started drinking beer today!
Opps! Galley hatch??
Have not heard much from you Frank since I mentioned that you should form a TJ Chapter in NZ.
Thought you might be mad at me or something.
Brian

[Sheddie]

Have not heard much from you Frank since I mentioned that you should form a TJ Chapter in NZ.
Thought you might be mad at me or something.
Brian

Hi Brian, you obviously have been working too hard on Kermit to read your own thread
I have been popping up there now and then
I had replied to your question about TJ Chapter here but had no reply check my build journal 2nd Jan (or that may have been the 1st on your side of the world).

[capnTelescope]

Maybe you should put Sandi to work posting the pictures. Just a suggestion. Gives you more time for beer.

[Sheddie]

Maybe you should put Sandi to work posting the pictures. Just a suggestion. Gives you more time for beer.

Maybe he should, as he didn't react to the idea of her doing the welding

[S. Heisley]

Okay, time to rib Brian:

Without
It didn't happen!

[Vedette]

Hi Sharon
I take pictures of Kermit every day!
But I am at that boring stage of the build. Do you really want to see pictures of welding, welding, welding, of small rust repair and support pieces??
Rounded the galley hatch corners yesterday, so I don't have to go in and get my forehead stitched up at a Gathering while trying to show off the galley features while drinking wine?
Tomorrow I hope to have the fenders fitted and tacked on.
Will you be at the Dam for my annual "Hug"??
Brian

[S. Heisley]

Hi Sharon
I take pictures of Kermit every day!

Tomorrow I hope to have the fenders fitted and tacked on.
Will you be at the Dam for my annual "Hug"??
Brian

I'm saving a hug just for you, Brian! Do you still think you'll have Kermit done enough to bring? The time for the Dam gathering is getting so close....

[KCStudly]

Do you really want to see pictures of welding, welding, welding, of small rust repair and support pieces??

A resounding "YES"! (please)

[Wobbly Wheels]

Do you really want to see pictures of welding, welding, welding, of small rust repair and support pieces??

A resounding "YES"! (please)

Seconded !
That stuff might seem 'old hat' to you but to a non-welder like me it's all new. You are also doing something unique so all the little things are different than what everyone else is doing.

[KCStudly]

You are... doing something unique so all the little things are different than what everyone else is doing.

My thought as well.

[Sheddie]

This is a comment I made in my travel thread, that I feel applies equally here
" Thanks for that KC. It's not until I start doing something like this that I realise that I do not take enough photos of the scenery on our travels. It is a case I suppose that I, like probably so many others, tend to take it too much for granted and think of it as the norm. Where I look at the photos posted by people in other parts of the world, and think wow look at that, I don't think that maybe those same people are probably doing the same thing."

[Vedette]

OKay, Okay today I promise! Right after I install mirrors on my neighbours truck, tack on Kermit's fenders for measuring, order Dexter axle .......etc.
Brian

[Vedette]

Okay it is catch up time!
Pictures from Ted's visit. It was cold, but we took Kermit outside for a photo shoot.
Brian

[Vedette]

We also brought the third donor vehicle down from the back forty....a 1949 International PU cab.
We cut the roof off. This will be used as the lower front section of the body and part of the under belly.
Brian