Ok here we go...PMF!

[Atomic77]

Yep. That's basically what I have.

[Sheddie]

Not realy but decided to buy the inlet and once it gets here I can be a bit more certain what I need.
What amps, volts is yours?
I went for the furrion 30amp 125v

can you use 125v in Australia

[dales133]

got a bit of carpet done and varnished the trim, in these pics the trims not varnished but i did that today, upload some more tomorrow

[dales133]

Not realy but decided to buy the inlet and once it gets here I can be a bit more certain what I need.
What amps, volts is yours?
I went for the furrion 30amp 125v

can you use 125v in Australia

30amp @ 125 volt = 15amp @ 250
i was told it wold be fine

[Atomic77]

The carpet looks amazing!

[Sheddie]

Yes that does look good especially with the timber faces.
It's handy being able to work on it outside the TD.

[dales133]

Cheers guys was a bit tricky doing the uprights and the bottom shelf in one piece as I had dividers to work around.ive carpeted a couple of boats and some rear storage draws in my Wagon so I've got a bit of experience under my belt...I come from a compition fishing background and we carpeted the boats because the aluminium and fiberglass hulls are cold and most of our fishing was offshore in the winter and it made them much cozier, so I wanted to replicate that to an exrent
I pretty much finished all the carpet i can for now while it's out but need to add the electrical raceway and a couple of small details first.
Plan today is finish the timber work off witch needs 2 more coats of poly and an emery papering to git it super smooth.
I'm also hoping to get the center door made and carpeted as well

[KCStudly]

I agree, +1. The carpeting looks especially tasty with the wood trim. Makes the wood stand out nicely!

[dales133]

Thanks Frank and KC.
Got an email today from supercheap autos and they had a car stereo clearance and I had a 10 dollar store credit so I went for a look.
Came home with some top of the tree pioneer 2 way 200 watt 4 inch speakers for 29 bucks!
Had to rip the carpet off the back of the two top outer shelves and thicken the shelf back with some ply and spaced the rest out to suit with foam.
It came up great and I re carpeted and mounted them.
I'm about to make the door and carpet and mount that then we are pretty much done.
The galley side will be next but I might do most of that in situ

[felixx]

That looks good.. really good! It is amazing what some of you folks can do!

[dales133]

Thanks bud it's just time and patience, the skill factors the smallest componant

[Sheddie]

Thanks bud it's just time and patience, the skill factors the smallest componant

You are not wrong there, try not to rush things too much.

[dales133]

Uh huh, havnt done much of that today! Been to the market and a browse around the new autobahn parts shop

[Sheddie]

End of the first innings
I think the black caps will be working to pull this one back

[dales133]

They've started well bowling