Got the port side wall glued down and trimmed to match the profile. Let it set for about 6 hours and began sanding. Big plus of cedar is it is soft so it sands pretty easy. Big negative to cedar is it is soft so the belt sander likes to pile up lots of little "balls" of cedar dust. Nice to be sanding in my temporary outside garage thingy, so the breeze blows away the dust. Got about 1/3 of the first wall base sanded this evening, should be able to finish it tomorrow. I'll then flip it, trim out the door and window cuts, flip it back and start the finish sanding. Heck, I might have this wall done by Sunday or Monday, then I get to do it all over again. At least all the strips are cut and numbered for wall #2. If I'm real lucky I might be mounting the walls to the trailer by next weekend.
I promise, I'm not rushing this, it is just going along pretty well and I take lots of breaks - hey I'm old.
dave