This coming Thursday I venture out on my first real camping outing (not including my hunting trip last year) with the CT and it is not really ready. But I paid for the nights many months ago so I could go along with the Old Dominion Chapter of TearJerkers for a few days at the Creeper Trail in Southwest VA. My wife and I are anxious to meet other TnTTT'rs out there so regardless of the readiness of the trailer, we are going.
I just wired one outlet so we have a refrigerator working and my wife is happy about her coffee pot. I have not gotten her into the wilderness aspect of cooking without electricity yet. Other then that, the trailer is in essence just a tent with hard sides and top.
I hurried as fast as I can to get to the state these photos shown, struggling with an ailing back.
The interior panels are all up and final ceiling insulation installed.
![Image](https://www.tnttt.com/gallery/image.php?album_id=3163&image_id=134166&display=popup)
![Image](https://www.tnttt.com/gallery/image.php?album_id=3163&image_id=134168&display=popup)
The ceiling is up and floor recoated with a sealer (before Allure Vinyl Panels are installed later)
And you know it is time to quit when you sort of paint yourself into a corner so to speak. See how I temporary located the refrigerator in the shower pan while painting the floor. But I forgot to plug it back into the outlet. Now I have to wait til the paint dries. And it does not do that quickly when you watch it.
![Image](https://www.tnttt.com/gallery/image.php?album_id=3163&image_id=134170&display=popup)
The Shower Panels got their final coat.
![Image](https://www.tnttt.com/gallery/image.php?album_id=3163&image_id=134167&display=popup)
The Marinco 30 Amp inlet installed. But only temporarily as the PD4045 is not yet installed. This powers only one outlet for the refrigerator.
And yes, I have some clean up to do with the sealer around the heater cover.
![Image](https://www.tnttt.com/gallery/image.php?album_id=3163&image_id=134169&display=popup)