Gearing up for long build weekend

[ssutton]

Taking off Friday and Monday really hoping to have a lot of the chassis done by Monday night. I started plasma cutting out the main frame brackets this afternoon.

CHASSIS MASTER ASSEM.JPG (49.16 KiB) Viewed 458 times

IMG_0655.JPG (154.65 KiB) Viewed 458 times

[ssutton]

IMG_0656.JPG (123.08 KiB) Viewed 456 times

Headed to Horrible Freight tomorrow after work to pick up a new horizontal band saw blade for all the 2X3 inch steel tubing.

[ssutton]

Finished up the plasma cutting last nite. Converted the CNC machine back to router mode preparing to cut wood flooring and aluminum.

https://www.youtube.com/watch?v=3RCwibhGDq0

[39Ratrod]

Nice setup!

[ssutton]

Spend today building the welding jacks. I decided to elevate the frame 36 inches so that I could weld all the way around without having to flip it over. I also installed the new horizontal band saw blade and dialed it in for square cuts. Tomorrow I will mount up the frame steel on the jacks, level and square everything and start the welding process.

https://www.youtube.com/watch?v=eDvjsPx4YV4&feature=youtu.be

[39Ratrod]

Wow! That is some techie stuff. I wouldn't understand a bit of that software.

[ssutton]

My son and I spent the day yesterday cutting up all the steel tubing. The HF band saw is SUPER SLOW cutting this heavy of material.

IMG_0669.JPG (163.19 KiB) Viewed 208 times

Finally done!

IMG_0673.JPG (142.41 KiB) Viewed 208 times

[ssutton]

Today started all the welding. I am NOT a great welder. Fortunately my brother in-law is a professional welder and he is a great teacher. Tacked everything in place and then ran out of gas. This week I will restock needed supplies and hopefully take off Friday for another long weekend of camper building. The welding stands that I made worked perfect. I was able to level and square the frame material in just a few minutes and lock everything into place.

IMG_0677.JPG (136.61 KiB) Viewed 206 times