Rhino Linings Deep Seal Epoxy with Hardener 3163with 10%-15% thinner. This combination will yield a 100-150 cps mixed viscosity (water) The hardener is cycloalphatic type which will also yield a water clear finish
I have been holding off getting started on my builds I need a few more Modular fiberglass building components. There main thing is underground bunkers .So this is there busiest time.
So I planned to coat my plywood with Clear Penetrating Epoxy Sealer.That way I'd be doing something.The cost was very high. So I talk to Mat @ thefiberglassstore. Was told all CPES is Rhino Linings Deep Seal Epoxy with Hardener 3163 with 10%-15% thinner.So why pay for someone to put it in there own can & name? So now I will pay $30 for 1/2 gal of Epoxy with Hardener. They don't sell it but someday will do a Modular fiberglass component building kit teardrop trailer for them.
So if you are buying this the tec. name.
lower costing CPES
4 posts
• Page 1 of 1
lower costing CPES
by dogscats » Tue Jul 21, 2015 3:30 pm
TODAY IS THE OLDEST YOU'VE EVER BEEN,
YET AT THE SAME TIME, THE YOUNGEST YOU'LL EVER BE,,, SO MAKE THE BEST OF IT WHILE YOU CAN, AND ENJOY THIS DAY WHILE IT LASTS
YET AT THE SAME TIME, THE YOUNGEST YOU'LL EVER BE,,, SO MAKE THE BEST OF IT WHILE YOU CAN, AND ENJOY THIS DAY WHILE IT LASTS
-
dogscats - Donating Member
- Posts: 235
- Images: 20
- Joined: Wed Mar 26, 2014 5:05 pm
Re: lower costing CPES
by mikeschn » Tue Jul 21, 2015 3:32 pm
That's good to know. I've always wondered...
Similar to the mix, but with different ingredients!
Mike...
Similar to the mix, but with different ingredients!
Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
-
mikeschn - Site Admin
- Posts: 19202
- Images: 475
- Joined: Tue Apr 13, 2004 11:01 am
- Location: MI
