Ok here we go...PMF!

[dales133]

Ive got mill finish insert trim going aroung the edge an yes the ally gois from frint to back and tbe subfloor section it ally checkerplate.
I was goint to put a big 50s style cadalac V in the canvas area under the flap in a similay angle.
Nothing set in stone but i just thought that it didnt look right with the ally the whole way down v the hatch.

[Sheddie]

2015-09-19 11.35.47 (640x360).jpg (177.98 KiB) Viewed 1204 times

Hay Dale, guess where we stopped for a cuppa yesterday

[dales133]

Still in good shape I trust?

[Sheddie]

The town is all looking quite good and attracting quit a few tourists. The train is doing regular trips up and down the street. When were you last there?

[dales133]

Long time ago.
Probably 10 years.
Where have you been?

[Sheddie]

We had a drive up to Kerikeri, with a couple of car club members, had lunch by the stone store then detoured through Paihia for an ice cream on the waterfront and home for afternoon tea. There have been a lot of changes around the stone store area since you were last there. I will stick some more pictures in my travel thread.

[dales133]

Cool thanks mate.
Keri Keri was a great place to live

[dales133]

Well this weekend I did a whole lot of procrastinating,a fair bit of shopping and wasted far to much time on the dreaded electrical.
I did however get the hatch spar installed for good, the last of the foam installed,sanded back,the final part of the roof skinned and flush trimmed.
All that's left to do on the exterior is to canvas the roof,work out my hatch notch then canvas the sides.
Wasn't to bad a weekend on the while

[lrrowe]

2015-09-19 11.35.47 (640x360).jpg

Hay Dale, guess where we stopped for a cuppa yesterday

Nice colorful storefront. Wish I could ride again, but the pressure from home will not allow me to get a bike. Keep up the good posting. For me it is the only way I will get to see your country.

[dales133]

2015-09-19 11.35.47 (640x360).jpg

Hay Dale, guess where we stopped for a cuppa yesterday

Nice colorful storefront. Wish I could ride again, but the pressure from home will not allow me to get a bike. Keep up the good posting. For me it is the only way I will get to see your country.

Those are actualy public toilets I helped build and tiled the interiors of going back almost 20 years.
Hundertwasser toilets or kawakawa toilets will show you a few internal pics.
Highlight of my career. ..well not financial but the time of my life

[dales133]

Installed the 240v power outlets today.
These are the new super slim wafer series double pole double outlets

uploadfromtaptalk1442827917688.jpg (27.47 KiB) Viewed 1098 times

uploadfromtaptalk1442827901773.jpg (44.4 KiB) Viewed 1098 times

uploadfromtaptalk1442827887218.jpg (37.71 KiB) Viewed 1098 times

Changed all my 12v around... god dawn this is doing my head in.

[dales133]

uploadfromtaptalk1442828023550.jpg (31.76 KiB) Viewed 1096 times

Theres the last section of roof in place.
Ready for canvas!

[KCStudly]

Keep "plugging" away at it!

[noseoil]

Looks like you have enough power outlets to run a data center! Isn't wiring fun? It's a PITA, but needs to be done so the rest can go together. Looks nice & should be a tidy setup once it's finished & working. Are you testing everything as you go, one circuit at a time?

[dales133]

Looks like you have enough power outlets to run a data center! Isn't wiring fun? It's a PITA, but needs to be done so the rest can go together. Looks nice & should be a tidy setup once it's finished & working. Are you testing everything as you go, one circuit at a time?

Yea wiring sucks.i might be alot of things but an electrician I'm not.
I've had all the internal circus going at least once and will be able to get to them all later.
All the lower circuts are perminantly accessible inside the raceway.

Ive probably gone a little overboard but rather have to much than to little.