Tennessee Teardrop

[Propstrike]

This evening marks the beginning of construction of my 5W x 8L x 4.5H teardrop. I've been drafting plans and storing up supplies for weeks, and the time has finally come!

I'll be building in somewhat of a cramped space, but it will be dry and warm.

The wheels/axles have been removed, and the chassis is on buckets.

The attachment ImageUploadedByTapatalk1443577177.668223.jpg is no longer available

[Propstrike]

Using a Kreg jig, I cut and joined floor framing that will be sandwiched between two layers of birch ply later.

ImageUploadedByTapatalk1443577564.179003.jpg (119.37 KiB) Viewed 1013 times

ImageUploadedByTapatalk1443577539.627865.jpg (88.34 KiB) Viewed 1013 times

[aggie79]

Congratulations on your progress!

Keep us updated on the build.

[KennethW]

In a tight space after you put the wheels on. The HF square wood moving dolly's work good.

[Propstrike]

I'll probably leave the wheels off until I'm finished. I'll certainly take your advice and pick up a couple dollies to move it out the door. I'll put the axle back under it once outside.

[Jdw2717]

Let us know if you have any questions and keep us posted on you build. We like pictures.

[Propstrike]

Last night was my last bit of work on the TD for a few days. Asphalt coating for underneath went down. Now, just waiting for it to set up and off gas before I resume.

ImageUploadedByTapatalk1443825040.166362.jpg (43.01 KiB) Viewed 795 times