Teardrops n Tiny Travel Trailers

by **dales133** » Thu Oct 01, 2015 4:57 am

Gave them a dummy fit tonight after work.
Couldnt help myself.

: uploadfromtaptalk1443693437987.jpg (32.75 KiB) Viewed 1436 times

: uploadfromtaptalk1443693413010.jpg (31.24 KiB) Viewed 1436 times

by **Atomic77** » Thu Oct 01, 2015 7:10 am

Fanfreakintastic! Those are awesome!

by **dales133** » Thu Oct 01, 2015 2:37 pm

Atomic77 wrote:Fanfreakintastic! Those are awesome!

Arnt they though?
Ive tried to find something cheaper for months but only 2 places have them and thier 190 each one place and 130 the other when they arnt on sale and that dosnt even come with bulbs.
I had to convert them to led and differnt bulb holders to get them bright enough but worth it to me.
Its all in the details As they say

by **S. Heisley** » Thu Oct 01, 2015 7:53 pm

Ohhh! ...Them's Purdy! :thumbsup:

by **dales133** » Fri Oct 02, 2015 12:14 am

S. Heisley wrote::o Ohhh! ...Them's Purdy!

Why thank you mam.

by **dales133** » Sat Oct 03, 2015 1:10 am

by **dales133** » Sat Oct 03, 2015 1:14 am

Well I needed to make a cover for the back of the internal fuse box and wiring and I came up with this!

: uploadfromtaptalk1443852832993.jpg (43.58 KiB) Viewed 1328 times

: uploadfromtaptalk1443852820096.jpg (42.25 KiB) Viewed 1328 times

: uploadfromtaptalk1443852767786.jpg (43.58 KiB) Viewed 1328 times

Because everybody needs a spice rack

: uploadfromtaptalk1443852832993.jpg (43.58 KiB) Viewed 1328 times

: uploadfromtaptalk1443852820096.jpg (42.25 KiB) Viewed 1328 times

: uploadfromtaptalk1443852767786.jpg (43.58 KiB) Viewed 1328 times

by **dales133** » Sun Oct 04, 2015 1:03 am

Had a pretty productive weekend all round.
Got all the lower 12v stuff wired up and the lower vertical raceway side made with the fuse box mounted to it and wired up.
Gives me 5 spare fuses for water pump ect and all 6 power outlets wired to it.
Got the spice rack/wiring nightmare cover made and tiled and cleaned up the work area this morning before finishing off the last of the pmf on the roof .
All I need to do is work out my hatch notch size and cut it then I can canvas the sides.
My edge trim only covers about 10mm of the sidewall so in looking at a high quality thin latex seal compressing onto an aluminium strip.
If this wot work ill look at other options later

by **dales133** » Mon Oct 05, 2015 1:59 am

Oops!

: uploadfromtaptalk1444028346704.jpg (48.88 KiB) Viewed 1247 times

: uploadfromtaptalk1444028334761.jpg (48.88 KiB) Viewed 1247 times

by **Ridjobradi** » Mon Oct 05, 2015 2:03 am

Ouch. That looks like something I would have done. I hope it works out without too much.

by **felixx** » Mon Oct 05, 2015 2:21 am

oh no!
hope you find a solution
she is a beauty

by **dales133** » Mon Oct 05, 2015 2:44 am

: uploadfromtaptalk1444031089081.jpg (34.91 KiB) Viewed 1246 times

: uploadfromtaptalk1444031073476.jpg (41.74 KiB) Viewed 1246 times

......

by **noseoil** » Mon Oct 05, 2015 7:30 am

Ouch! Lost the bearing, or just slipped out of the channel? Looks like it's time for some bondo...

by **KCStudly** » Mon Oct 05, 2015 7:33 am

Ouch. There but for the grace of (some higher power) go I.

I wonder if very many beers proceeded and followed this event. :beer:

BTW, that'll buff out. (There is always a way to fix stuff.)

by **smeerkees** » Mon Oct 05, 2015 7:55 am

uhh,.. : mice?, looks like a pretty hungry one to me... :thinking:

Teardrops n Tiny Travel Trailers

Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Re: Ok here we go...PMF!

Who is online