Boy I'm really in mental meldown over the final finish of my TD. I have been planning on using Al, but now have a couple of issues (cold feet) about it. So now I'm considering painting, I spent most of the day Friday going to various paint specialty shops-not your run of the mill Sher/Will or Home Depot. It now appears I have messed up by applying a coat of spar urethane. I was told by one shop I could scuff it up and use an oil base primer and top coat-then another told me to use a heavy acrylic lacquer to cover the grain.........geeeezz I wished I knew what I was doing.
I guess my real question is-can I use what most people here have used on top of the coat of urethane? If so its off to the archives to read read read.
The good news is I solved getting the Petcool a/c ported into and out of the TD in an acceptable manner-I'll post on it later with pics-but right now the whole finish thing has go me in a head lock.
Thanks
Mc