6x14 project

Converting Cargo Trailers into TTTs

6x14 project

Postby DirtyD1833 » Thu Feb 11, 2016 12:14 pm

Just got a smoking deal on a brand new 6x14 dressed out. The plan is for this to become a hunting rig. It already has a 30 amp service, wired and braced for rooftop AC and factory insulated roof and walls. Probably going to be picking some brains around here....
Image
Image
Image
Image
Image
DirtyD1833
Teardrop Advisor
 
Posts: 65
Joined: Tue Dec 15, 2015 2:20 pm

Re: 6x14 project

Postby DirtyD1833 » Thu Feb 11, 2016 1:05 pm

My intent on this build is to have a "hook and book" hunting cabin for me and my son. First thing on the list is going to be adding some shelving on the drivers side, about 4 1/2 feet off the floor. Next on the list is going to be converting the 4 pin to a 7 pin and installing a 12V battery to run LED lights I will be installing inside and out. I will eventually want to tie the battery system into the 30 A service so that I can have seamless power, but I think that is a little more involved than I want to get right now. Folding bunks are on the list, and by next summer I want to drop a 13500 unit on the roof for year round comfort and an axle flip to gain a few inches of ground clearance.
DirtyD1833
Teardrop Advisor
 
Posts: 65
Joined: Tue Dec 15, 2015 2:20 pm

Re: 6x14 project

Postby McDave » Thu Feb 11, 2016 1:34 pm

Nice!
Great platform to start out with. Sounds like you've got a plan.
Good luck, Ill be following along.
McDave

8)
User avatar
McDave
Donating Member
 
Posts: 2288
Images: 412
Joined: Sun Jan 25, 2015 5:21 am
Location: Tiny Town, Montana
Top

Re: 6x14 project

Postby elcam84 » Fri Feb 12, 2016 5:35 pm

Nice trailer. The inside is nicer than what I normally see. The insides are usually cheap ply and dark. That white interior looks great. Personally I'd cover that roof in solar panels as well.
Not sure where you are located but there is a place in Arlington that has new take off ac units for $100.
elcam84
Teardrop Master
 
Posts: 126
Joined: Thu Oct 30, 2008 2:59 pm
Top

Re: 6x14 project

Postby chiefairwrench » Sat Feb 13, 2016 5:38 am

Wow on th AC what is their name and do they ship? :shock:
User avatar
chiefairwrench
Teardrop Master
 
Posts: 103
Images: 3
Joined: Wed Jan 27, 2016 4:47 am
Location: Georgia
Top

Re: 6x14 project

Postby elcam84 » Sat Feb 13, 2016 9:28 am

I found it from a post here on the forum. I have a friend that I visit that want one and wa s thinking of picking one up boxing it and taking it as checked luggage...

I doubt they will ship it as its a production shop and don't want to mess with shipping. I could figure up the size and weight and see what it'd cost to ship. I plan on picking one up myself as well.
elcam84
Teardrop Master
 
Posts: 126
Joined: Thu Oct 30, 2008 2:59 pm
Top

Re: 6x14 project

Postby elcam84 » Sat Feb 13, 2016 9:30 am

Do a search for rooftop ac on the forum. I'm using tappa talk on the tablet and it doesn't let me copy and paste anything so I can't put a direct link in.
elcam84
Teardrop Master
 
Posts: 126
Joined: Thu Oct 30, 2008 2:59 pm
Top

Re: 6x14 project

Postby DirtyD1833 » Thu Mar 03, 2016 7:43 pm

So I am building my list... If the "pros" here could take a look, I am open to suggestions and advice...

three of theses....
http://www.amazon.com/dp/B013479YAC/ref ... 669L35U1DT

two of these curb side, one over the ramp...
http://www.amazon.com/dp/B008XZAQDU/ref ... UVN5&psc=1

12V System...
http://www.amazon.com/dp/B00F9EO5OO/ref ... D8H6&psc=1

https://www.batteriesplus.com/battery/m ... m/sli24mdc

http://www.amazon.com/dp/B000THQ0CQ/ref ... GJCJ&psc=1

http://www.amazon.com/dp/B004W5SGBO/ref ... 9GK1&psc=1

http://www.amazon.com/dp/B005DUUL9W/ref ... 46HM&psc=1

http://www.amazon.com/dp/B00RJVJJCI/ref ... TYZA&psc=1

two of these...

http://www.amazon.com/dp/B002UC6PY6/ref ... UT96&psc=1

going to wire one of these in to the roof vent on a switch as a cheap fantastic fan until I put the ac unit on...

http://www.amazon.com/dp/B008UYZ102/ref ... FQ6GQ4NG3D

What am I missing on the electrical side? I am going to pull the two switched dome lights off the trailer wiring and run them off the battery. I am assuming I can wire the 12V hot off the 7 pin harness to the controller, but do I need some way to switch from solar to TV or will the controller handle that?
DirtyD1833
Teardrop Advisor
 
Posts: 65
Joined: Tue Dec 15, 2015 2:20 pm
Top

Re: 6x14 project

Postby DirtyD1833 » Fri Mar 04, 2016 3:30 pm

So the adoption of ATF Resolution 41P is probably going to force me to "reallocate" money from my toy fund for a while, may just start piece meaning things together... Looking forward to input.
DirtyD1833
Teardrop Advisor
 
Posts: 65
Joined: Tue Dec 15, 2015 2:20 pm
Top

Re: 6x14 project

Postby McDave » Sun Mar 06, 2016 3:44 pm

Hello Dirty,
Here is some info (opinion?) on deep cell batteries. Keep in mind this was written from a RV perspective, not solar.
http://rvservices.koa.com/rvinformation ... teries.asp
As far as solar panels go, my understanding is that monocrystalline is more efficient than poly, also more expensive. I have my eye on this set up.
http://www.amazon.com/gp/product/B00B8L ... PDKIKX0DER
Also, I would give serious thought to a WFCO or Progressive Dynamics power center. With the ability to charge batteries, A/C breakers and DC fuses it gives you a lot more options and protection. IMHO.
Budgeting for one of these conversions can be complicated. Wants vs Needs etc. I have been collecting items for almost a year now, and just started the insulation phase last week. My build will be a Harley Hauler/Camper set-up with A/C, toilet/ shower combo, fridge, microwave, bar sink etc. Not easy in a 6x12 platform. Take a look on ebay for items, (new and used) and sometimes even on this forum. I scored my A/C, 2 windows, and a WFCO 8955 from this site!
Good Luck and keep us posted on your progress. I have been taking pics, and will start a build journal thread as soon as I have some real progress.
McDave
User avatar
McDave
Donating Member
 
Posts: 2288
Images: 412
Joined: Sun Jan 25, 2015 5:21 am
Location: Tiny Town, Montana
Top

Re: 6x14 project

Postby DirtyD1833 » Sat Apr 02, 2016 8:12 pm

Not a whole lot of progress, but here is where it sits after a few hours today... And I only drilled two holes all the way through the side!
ImageImageImage
DirtyD1833
Teardrop Advisor
 
Posts: 65
Joined: Tue Dec 15, 2015 2:20 pm
Top

Re: 6x14 project

Postby CoventryKid » Sun Apr 03, 2016 12:46 am

Nice trailer!

Can you turn that shelf upside down so lip faces UP to help keep bins in place?? Doesn't matter how tight those bungies are, those tubs are sure to slide around.

Just my humble suggestion.
Doug
Vancouver Island, BC

Image
GMC Savana Explorer Limited SE hightop conversion van
NEO NAVR 7x16 V-nose aluminum trailer now a comfortable travel trailer

Build: http://www.tusker-international.com/1-trlr-build.html
CoventryKid
Teardrop Master
 
Posts: 279
Images: 130
Joined: Mon Aug 05, 2013 3:48 pm
Location: Vancouver Island, BC
Top

Re: 6x14 project

Postby hankaye » Sun Apr 03, 2016 8:59 am

DirtyD1833, Howdy;

I agree about the tubs scootin' about without anything to restrain them other then the bungees.
Try some of this under the tubs and you won't have to mess with turning the shelf upside down.
http://www.walmart.com/ip/Duck-Brand-20 ... e/23262214
Just a suggestion ...

I do like the way you have kept the floor clean for the 4-wheelers.

hank
Striving for a less complicated life since 1949 ...
Every day I beat my own previous record for number of consecutive days I've stayed alive.
hankaye
2000 Club
2000 Club
 
Posts: 2567
Images: 1
Joined: Thu Dec 06, 2012 5:35 pm
Location: S.W. New Mexico
Top

Re: 6x14 project

Postby DirtyD1833 » Sun Apr 03, 2016 3:05 pm

Turning it upside down was the original plan, and why I bought it with a lip, unfortunately it won't "clip" into the wall brackets when upside down. I actually have "shelf liner" otw, I am going to use a solid rubber mat that I will zip tie to the shelf, giving me a solid surface underneath the totes so I can rest small items there while not traveling.
DirtyD1833
Teardrop Advisor
 
Posts: 65
Joined: Tue Dec 15, 2015 2:20 pm
Top

Re: 6x14 project

Postby DirtyD1833 » Sun Apr 03, 2016 3:10 pm

As for the floor, the original purchase of this was specifically for the four wheelers. I already have a Harley in the garage and didn't want to give up anymore floor space. This trailer gives me a place to keep the quads and have a hook and book set up to head for the deer lease with minimal packing. I was originally going to use two horizontal rows of e-track to put shelves across at about the same height and once at camp drop down to make beds, but my unit is moving and in the hustle I acquired four cots. I am going to just paint the floor with exterior deck paint for a no skid finished surface.
DirtyD1833
Teardrop Advisor
 
Posts: 65
Joined: Tue Dec 15, 2015 2:20 pm
Top

Next

Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: No registered users and 4 guests