Had this drug home today for a pittance. Started stripping it out in the 124 deg heat index outside, so don't expect Einstein stuff from me. It's been a leaker for a few years and ignored. took new tires and rims, too.
I just bought Chinese 4.80x12 load range B rims and tires. they got it the 10 miles home and will work better under only 700 pounds later after the 4'x8' Benroy gets stuck on top..
But the 52" wide frame after cutting the side extensions off (if I go that way) will require some head scratching..not much though. I have a plan swishing thru my brain cells at this time..
But...it's got a lot of stuff inside I can part/scrap out. Scrap the alum siding/top metal. Cut the back section of frame to 36"-38" aft of wheel centers. It's got a torsion axle setup. Get rid of the surge brake system.
Take a lot of weight off of the frame.. and go forth from there.
It is a start!