hi guys!!! im a t.d. newbie and i need some advice.

[AmyH]

Welcome aboard Bronco! On a side note, if that is your Bronco in the pic of you, it is incredibly nice looking! That is one awesome Bronco, and my favorite color scheme no less! Good luck on the build. I changed my plans over the months and months of thinking that I have been doing, and now I am building based on the Generic Benroy plans as well. Mike did a great job putting those plans together. We'll all be looking forward to your pics!

Amy

[bronco]

thanks again for the welcome. today i attatched the walls and installed the first section of spars so i can actually see it starting to form. the next step will be to finish the inside walls and decide what to do about finishing the flooring. me and the wife remodeled our laundry room and i think there might be enough vinyl flooring material to do it.
i have ran into one snag though. after doing everything today i noticed my trailer leans about 1/4-1/2" to the left. after looking everything over its as if the suspension on the passenger side is a little beefier than the other. i did attatch one of those trailer jacks with the wheel on it on the front, and its mounted on the high side. i dont know if mounting it on the low side would even things out or not. anyone have this same problem.
and thanks to bledsoe for the link to your benroy build up. and yes its nice to know theres local people in the area building these. i look forward to getting to know you all. im off to bed. we have a car show to be at early in the big town of Clatskanie, Oregon (ha!)
im going to get some pics of the tear drop and get them going here and also soon i need to get help getting my personal pic in my messages. its nice to see all the people your talking to. have a good night everyone!