Nookery Updates -- 25 Oct Update. Working on the galley

[bonnie]

Yup. Story later.




Sent from my iPhone using Tapatalk

[bonnie]

First coat.


Sent from my iPhone using Tapatalk

[GPW]

Question , did you stir your green paint before applying it .... ? Looks a bit thin eh ?

[bonnie]

Yes I did. I had the same reaction. 2nd coat was much better. Drying now. We'll see. Could be my lack of painting skills too.


Sent from my iPhone using Tapatalk

[bonnie]

Much better. The frog tape was well worth the money.


Sent from my iPhone using Tapatalk

[GPW]

Gosh , that’s a Nice Sharp line !!!! Wonderful !!!

[KCStudly]

Very sharp!

[bonnie]

And upright.

Not bolted down as of yet. But I sat in it and it feels solid. Another milestone.


Sent from my iPhone using Tapatalk

[bonnie]

Rear shot




Sent from my iPhone using Tapatalk

[GPW]

Well , there you are , all Upright and almost ready to go ...

[bonnie]

I know! So excited.


Sent from my iPhone using Tapatalk

[KCStudly]

... So excited.

... and deservedly so.

[bonnie]

Everything I touched today was a mess with one exception.



I have lights.


Sent from my iPhone using Tapatalk

[bonnie]

Actually it was a mess too. The foam shelf I worked so hard on doesn't fit between the Thule cabinets. Still the don't look bad this way. The lights were set to the lowest brightness. At full tilt it lights up the entire cabin. It was a led set meant for TVs and runs off of USB. I drilled holes in the tops and sides of the top two cabinets to route the cables and hide the control box. It has a remote and can do various light effects. I'm wiring a 12v plug and a separate 12v USB plug in the front of the cabin. Right at the moment the lights are plugged into my starter/tire compressor pack. I am pleased with the outcome.


Sent from my iPhone using Tapatalk

[GPW]

Wow !!! More Space and a Light Show too ... COOL !!! What about those cabinets ... what didn’t fit ???