Started on the front interior. I decided to have my power centers in the middle of the front shelving with open shelves on the sides. I am planning on having the side panels that box in the wiring to be removable so that I can have access to the back of the panel. Just need to figure out how I am going to do that.
Framing out the shelf
![Image](https://www.tnttt.com/gallery/image.php?album_id=4459&image_id=145539)
Gluing on the shelf
![Image](https://www.tnttt.com/gallery/image.php?album_id=4459&image_id=145543)
Positioned my busbars, the covered ones will be hot distribution and the uncovered is the grounding busbar. Hole cut in the front panel for the shore power inlet.
![Image](https://www.tnttt.com/gallery/image.php?album_id=4459&image_id=145544)
![Image](https://www.tnttt.com/gallery/image.php?album_id=4459&image_id=145545)
PD4045, cutout above is for my solar panal controller, the top holes are for 2 reading lights, the middle holes are for switches that will control the porch lights, and the bottom holes are one 12V inlet, and one USB plug. The clamped 1/8 ply is just for planning purposes.
![Image](https://www.tnttt.com/gallery/image.php?album_id=4459&image_id=145540)
Started running some wiring, split wire loom added through the spars. The rest of the wiring will be covered as well before insulation and roofing.
![Image](https://www.tnttt.com/gallery/image.php?album_id=4459&image_id=145546)
closeup