Chesapeake Light Craft Teardrop Trailer

[friz]

They seal against a jam that has yet to be bonded in place.

Sent from my Altair 8800 using Tapatalk

[KingAirNeal]

They seal against a jam that has yet to be bonded in place.

Sent from my Altair 8800 using Tapatalk

Rog that, thanks.


Sent from my iPad using Tapatalk

[friz]

Sent from my Altair 8800 using Tapatalk

[friz]

Sent from my Altair 8800 using Tapatalk

[captainj101]

Aloha Friz,

I have built several boats over the years and I will say that I am impressed with not only the kit but especially your workmanship!

Keep it up!!

Capt

[friz]

Aloha Friz,

I have built several boats over the years and I will say that I am impressed with not only the kit but especially your workmanship!

Keep it up!!

Capt

Thanks.

Sent from my Altair 8800 using Tapatalk

[friz]

Cleaning up openings and glueing door/hatch frames.

Sent from my Altair 8800 using Tapatalk

[friz]

Dry fitting the door frame. Looks like it's going to work.

Sent from my Altair 8800 using Tapatalk

[friz]

Glueing it up


Sent from my Altair 8800 using Tapatalk

[KingAirNeal]

That... is a LOT of clamps!


Sent from my iPad using Tapatalk

[friz]

I had to buy 46 to get free shipping. Used everyone. CLC recommends a minimum of 30 but more if you have them.

Sent from my Altair 8800 using Tapatalk

[friz]

Other side tonight.


Sent from my Altair 8800 using Tapatalk

[Pmullen503]

Thanks for continuing to post your progress. I've built a couple CLC boat so I'm not surprised the kit goes together well. But this was the one area that I had my doubts about when I saw this kit: could do the doors so they don't leak.

[friz]

Thanks for continuing to post your progress. I've built a couple CLC boat so I'm not surprised the kit goes together well. But this was the one area that I had my doubts about when I saw this kit: could do the doors so they don't leak.

That's why I did the jams first. I want to be able to fit the door to them when I glue the stiffeners. I would like to avoid the strap if possible. The kit comes with a pull strap that looks like an afterthought. It is also used to pull the top and bottom of the door together to "tune" the fit.

Sent from my Altair 8800 using Tapatalk

[friz]

I got a case of Canadian trailer spacers in the mail today.

Sent from my Altair 8800 using Tapatalk