DWT77 wrote:I didn't find any that were wider than 10 inches. I would of liked a 12 inch fender. Given the time I spent with these fenders, I probably should of got some 1 inch tubing, 14 gauge sheet metal and try to make them myself.
That's the same boat I am in. I wanted flat top fenders, but the Jeep style is a little peaky. With 31 inch AT's and generous side wall clearance to the cabin, the 10 inch width has to be spaced out from the cabin wall to just barely cover the tread.
I thought about buying a third fender, sectioning all of them to make them wider, and then modifying them to stretch, as you did, but that is as much, if not more work than just starting from scratch; probably more expensive in the end, and likely harder to make come out nice dealing with warping and blending all the welds.