PDF vs DXF

[Hog Wild]

Any difference besides program? I can't open dxf.

[azgreg]

You need a CAD program to open a DXF file.

[edgeau]

LibreCad is a free one that I find very useful.

Sent from my ZTE T84 using Tapatalk

[Hog Wild]

Thanks Guys. I never used a CAD, so I don't know use one. I'm not very computer savy. More reclined than inclined.

[azgreg]

Thanks Guys. I never used a CAD, so I don't know use one. I'm not very computer savy. More reclined than inclined.

If you post the DXF file here I can convert it for you when I go to work tomorrow.

[Hog Wild]

Thanks for the offer azgregg. But don' t want to be a bother. I was looking at the Simple in design resource. Not sure why that one appeals to me more than the others.

[azgreg]

Thanks for the offer azgregg. But don' t want to be a bother. I was looking at the Simple in design resource. Not sure why that one appeals to me more than the others.

There's a PDF of the simple right here:

https://web.archive.org/web/20160331001 ... Simple.pdf

And the rimple:

https://web.archive.org/web/20160331001 ... Rimple.pdf

[Pmullen503]

The benefit of a DXF over a PDF is that you can scale up a DXF and the lines stay the same thickness. On a PDF the lines get thicker. Not a problem for most things we do. The other benefit to DXF is if you plan to have pieces cut out on a laser or CNC router. Still a fair amount of work to do, but you are a LOT farther along starting with a DXF compared to having only a PDF.

[Dale M.]

There is online services that you can upload a file to in one format, and it will convert file to another format and either e-mail file to you are setup a download of converted file for you...

One such service...

http://www.zamzar.com/

This screen capture says they can do it....

cadconvert.jpg (38.06 KiB) Viewed 823 times

IF this site can't do it, search out similar type of sites and possibly be able to find one that can...

Dale

[Hog Wild]

Thanks again Guys. This site is the best.