5150red wrote:VERY IMPRESSIVE WORKMANSHIP!!
I will probably "borrow" a few of your techniques on my build. The part that I don't understand is the electrical I see the fuse box and regulator you used, I just don't know how to select the correct items for my build.
Thanks.
The electrical is fairly basic. In my case I just used house hold style switches. I used standard cord type wire from the fuse box out to the switches. I have three switches inside and one in the galley. From the switches I ran speaker wire to the lights. All my lights are LED and low amp/volt draw so large wire is not needed past the switches. Just keep negative, negative and positive, positive and you should have no problems. Most people do not use a regulator, but in some instances the LEDs are driven too hard and prematurely dim and/or fail. I chose to have the regulator just as a extra precaution to save on LED damage.
Just make sure you purchase 12V accessories and run wire of correct size to run the accessories with. There is a lot of info on that online and here in the electrical section.
Good luck.